BX444-Mc

4 Channel explosive and toxic gas detection controller for industrial use

The BX444-Mc control unit has been designed and built according to European regulations to flexibly detect thepresence of toxic and/or explosive gas and oxygen, through the connection of 4 remote probes.A microprocessor is used to create a complete surveillance and control system with maximum flexibility. Thanks to this and its other features BX444-Mc is suitable for civil use, industrial use and small underground car parks.

The BX444-M control unit has three hazard levels:

1st LEVEL, 1st Alarm. This was set to 8 % of L.E.L. (120ppm)

2nd LEVEL, 2nd Alarm. This was set at 13% of L.E.L. (200ppm)

3rd LEVEL, Main Alarm. This was set at 20 % of L.E.L. (300ppm)

Primary power supply: 110 ÷ 240 VAC 50/60 Hz
Secondary power supply: 12 V. DC ± 10%
Absorption: 9.5 W in alarm
Pre alarm output relay: ON-OFF
Alarm output relay: In exchange
Failure relay: ON – OFF
Gas probe: Max. 4
Catalytic, Electrochemical, Semiconductor, Pellistore
Oxygen alarm threshold: deficiency and excess in%
Explosive alarm threshold: 8 – 13 – 20% LIE
Toxic alarm threshold: 120 – 200 – 300 ppm
Input signal: 4 ÷ 20 mA on 220 Ohm
Accuracy: 1% FS
Positive Security: Selectable
Color display changeable according to the working status
Working temperature: -10 ° C ÷ + 60 ° C
Protection degree: IP44
Installation: Wall or square
Dimension: 144 x 144 x 108
Package Dimensions: 170 x 170 x 120
Weight: approx. 500 grams

The perfect partner for the wholesaler

For years, Beinat is your company’s trusted partner: its products are 100% guaranteed and its reliability allows a constant turnover within your warehouse. The study of our products allows obtaining advanced equipment capable to meet all needs. Our quality certifications and warranty

CONTACT US

Our quality and guarantee certifications

The importance of quality policy

The goal has always been to provide products that meet the customer’s needs, through continuous performance improvement and with a full commitment.