4 channel explosive, toxic gas and fire detection controller

BEINAT S.r.l. always attentive to the needs of the market and new technologies has overhauled a previous versatile control unit, BX449F, for GAS and/or FIRE detection for industrial applications. To which can connect sensors to detect Toxic / Explosive Gases, Oxygen, and fire principles.

The control unit has two hazard levels:

1st LEVEL, pre-alarm. This is set at 13% of L.E.L. (200ppm) for all sensors.

2nd LEVEL, main alarm. This is set at 20 % of L.E.L. (300ppm) for all snsors.

To the BX449F you can connect up to 5 fire detectors per each zone, either temperature or optical smoke detectors, through a balanced line.

Primary power supply: 230/240 VAC 50/60 Hz
Secondary power supply: 12 V. DC ± 10%
Absorption: 20W in alarm
Conventional Gas Probes: Max 4
Catalytic, Electrochemical, Semiconductor
Connectable FIRE probes: Max.15 Optical smoke, Temperature
Explosive alarm threshold: from 13 to 20% LIE
Toxic alarm threshold: 120 – 200 – 300 ppm
Input signal: 4 ÷ 20 mA on 220 Ohm
Accuracy: 1% FS
Display: 3 digits
Positive Security: Selectable
Pre alarm output relay: ON – OFF
Alarm output relay: In exchange
Failure relay: ON – OFF
Working temperature: -10 ° C ÷ + 60 ° C
Protection degree: IP20
Installation: Panel, Omega bar
Dimensions: 158x90x58 9 modules
Package Dimensions: 197 x 122 x 67
Weight: 560 grams approx.

The perfect partner for the wholesaler

For years, Beinat is your company’s trusted partner: its products are 100% guaranteed and its reliability allows a constant turnover within your warehouse. The study of our products allows obtaining advanced equipment capable to meet all needs. Our quality certifications and warranty


Our quality and guarantee certifications

The importance of quality policy

The goal has always been to provide products that meet the customer’s needs, through continuous performance improvement and with a full commitment.