SGI895-Atex

ATEX addressable sensor for explosion-proof areas

II 2G Ex db IIC T6 Gb

The addressable Atex gas sensor SGI895 with protection degree IP66 Explosion-proof, ATEX Certified.

It has the prerogative of being able to control the presence of Explosive Gases, through its Pellistor technology sensor, and thanks to a RS-485 MODBUS serial communication network, it can be combined with our BXI32 control unit. Thanks to more innovative technical features, such as control software, the probe is suitable for industrial uses, boiler rooms and industrial kitchens, detecting Methane, LPG or others gas (see user guide)

Thanks to its innovative technology advances, the sensor is suitable for industrial use and car parks.

The sensor is managed by a microprocessor, which executes a self-diagnosis and therefore an AUTOMATIC CALIBRATION in order to obtain the maximum detection accuracy at all times. The self-calibration means the sensor adapts in harsh and variable temperature environments, avoiding false alarms due to anomalous events

Test: to perform a precise and self-certified test, use the TS1008 instrument, which also serves to carry out the annual check.

Power supply: 12 ÷ 24 VDC ± 10%
Absorption: 90 mA in operation, 110 mA in alarm Max @ 13.8V
Signals: green light for regular operation, yellow fault light, red alarm light
Working range of the sensitive element referring to explosive gas: 100% of L.I.E.
Working range of the sensitive element referring to toxic gas: 1000 ppm Detector accuracy: 1% FS
Long term drift in clean air: <3% of L.I.E.
Response time: <10 ”
Waiting time (warm-up time): 4 minutes
USB test socket: TS1008
Analog output signal: 4 ÷ 20 mA on 220 Ohm standard tolerance
Operating humidity: 20-90% RH / 40 ° C
Operating temperature for explosive gases: 0 ° C to + 60 ° C
Operating temperature for toxic gases: from -20 ° C to + 50 ° C
Storage temperature: from -25 ° C to + 70 ° C
Controllers that can be used: BX444-Mc, BX449 / F, GS100M, BX180, BX280, BX150, GS300M, DS300-Mc BX316xp, BX308xp
Maximum distance between probe and control unit: 100 m
Probe connection cables section: 1 mm

The perfect partner for the wholesaler

For years, Beinat is your company’s trusted partner: its products are 100% guaranteed and its reliability allows a constant turnover within your warehouse. The study of our products allows obtaining advanced equipment capable to meet all needs. Our quality certifications and warranty

CONTACT US

Our quality and guarantee certifications

The importance of quality policy

The goal has always been to provide products that meet the customer’s needs, through continuous performance improvement and with a full commitment.