SG580 EXPLOSIVE Gas Probe and Control Unit for Industrial use NO ATEX
Cod. SG580 - EXPLOSIVE Gas Probe and Control Unit for Industrial use NO ATEX
The new SG580 is born from the elegance and prestige that has always distinguished BEINAT S.r.l. and from the industrial fitness concept.
The device has the capacity of controlling, the presence of various types of gases explosive , toxic.
The probe is managed by a microprocessor which not only supplies an alarm signal to the control unit connected to it, but also allows execution of a self-diagnosis and therefore an AUTOMATIC CALIBRATION, in order to always have the maximum detection accuracy. The probe has a 0 ÷ 20 % L.E.L. linear output, conforming to the 4 ÷ 20mA standard.
The more important news of this probe is the capability to change the sensing element at the end of the life-cycle directly from a technician without need to send back the probe for assistance.
Power Supply: 12÷24 VDC dc ± 10%
Power Demand: 1W max @13,8V
Indication: Green LED Normal operation, Red LED
State of Alarm, LED Yellow Fault Operative Range: 0÷20% LEL or 0÷100% del LEL
Input Signal: 4 ÷ 20 mA
Data transmission: Not present
Service Port: Present
Functioning Temperature: -10°C to +50°C
Functioning humidity : Lower than 90% RH
Installation Wall mounted
Degree of Protection: IP66
Compatible control units: whole range
Case and Size: Aluminum 100 mm
Weight: 670 grams about