BEINAT SG800 - Standalone Special Gas probe for Industrial use
  • BEINAT SG800 - Standalone Special Gas probe for Industrial use
  • BEINAT SG800 - Standalone Special Gas probe for Industrial use
  • BEINAT SG800 - Standalone Special Gas probe for Industrial use
  • BEINAT SG800 - Standalone Special Gas probe for Industrial use
  • BEINAT SG800 - Standalone Special Gas probe for Industrial use

SG800 Standalone Special Gas probe for Industrial use

Cod. SG800 - Standalone Special Gas probe for Industrial use

The new SG800 is born from the elegance and prestige that has always distinguished BEINAT S.r.l. and from the industrial fitness
concept.
The device has the capacity of controlling, the presence of various types of gases explosive , toxic. The probe is managed by a microprocessor which not only supplies an alarm signal to the control unit connected to it, but also allows execution of a selfdiagnosis and therefore an AUTOMATIC CALIBRATION, in order to always have the maximum detection accuracy. The probe has a 0 ÷ 20 % L.E.L. linear output, conforming to the 4 ÷ 20mA standard.
ALARM THRESHOLDS:
1st LEVEL, pre-alarm. Set at 13 % of L.E.L. The pre-alarm drives 1 relay
2nd LEVEL, main alarm. Set at 20 % of L.E.L. The alarm drives 1 relay
The more important news of this probe is the capability to change the sensing element at the end of the life-cycle directly from a technician.

Power Supply: 12÷24 V. dc ± 10%
Power Demand: 1,5 W max @13,8V
The Pre alarm Relay: 10A SELV
Main Alarm Relays: 10A SELV
Indication: Green LED Normal operation, Red LED State of Alarm, LED Yellow Fault
Sensor: Catalytic
Input Signal: 4 ÷ 20 mA
Data transmission: Not present
Service Port: Present
1st Alarm Threshold: At 13% of LEL
2nd Alarm Threshold: At 20% of LEL
Test Phase Duration: 90 seconds
Functioning Temperature: -10°C to +50°C
Degree of Protection: IP65
Compatible control units: whole range
Case and Size: Aluminium
Size: 100x100x60
Packaging: 197x122x67
Weight: 550 grams about


PDF Download pdf file


VIDEO VIDEO TUTORIAL: CONNECTIONS

SG800 Connections »

Probes - Control - Test »

SG800

You might also like