Addressable - Conventional stand-alone EXPLOSIVE gas sensors for industrial use - Serie SGF BEINAT
  • Addressable - Conventional stand-alone EXPLOSIVE gas sensors for industrial use - Serie SGF BEINAT
  • Addressable - Conventional stand-alone EXPLOSIVE gas sensors for industrial use - Serie SGF BEINAT
  • Addressable - Conventional stand-alone EXPLOSIVE gas sensors for industrial use - Serie SGF BEINAT
  • Addressable - Conventional stand-alone EXPLOSIVE gas sensors for industrial use - Serie SGF BEINAT

SGF100 Addressable - Conventional stand-alone EXPLOSIVE gas sensors for industrial use

Cod. Serie SGF - Addressable - Conventional stand-alone EXPLOSIVE gas sensors for industrial use

Conventional stand-alone EXPLOSIVE gas probe for industrial use  

Since 1972 we write a story of passion for our work and with a unique style by seeking safety against gas leaks, in a highly technological and modern market. The BEINAT S.r.l. has designed a gas detection sensor for a civils and industrials installations
In fact, the new stand-alone sensorss of SGF series, have the prerogative to control using variable technology sensors depending on the type of gas the presence of: Gas Explosives and / or toxic (see table below).
The probe is managed by a microprocessor which in addition to providing an alarm signal to the control unit to which is connected, allows to do a selfdiagnosis, and then an Automatic Calibration, in order to have steadily over time the maximum detection accuracy
The transmission of the monitored gas detection occurs via Analog output signal 4 ÷ 20 mA.
The sensors are designed for:
1) Select the working range to 20% LEL or 100% LEL
2) Select the positive safety relay
Test: to perform a precise and self-certified test, use the TS1007 instrument, which also serves to carry out the annual check.


PDF Download pdf file

Addressable stand-alone EXPLOSIVE gas sensors for industrial use

Since 1972 we write a story of passion for our work and with a unique style by seeking safety against gas leaks, in a highly technological and modern market. The BEINAT S.r.l. has designed a gas detection sensor for a civils and industrials installations.
In fact, the new stand-alone sensorss of SGF series, have the prerogative to control using variable technology sensors depending on the type of gas the presence of: Gas Explosives and / or toxic (see table below).
The probe is managed by a microprocessor which in addition to providing an alarm signal to the control unit to which is connected, allows to do a selfdiagnosis, and then an Automatic Calibration, in order to have steadily over time the maximum detection accuracy.
The transmission of the monitored gas detection occurs via a serial RS485 Modbus RTU protocol.
The sensors are designed for:
1) Select the working range to 20% LEL or 100% LEL
2) Select the positive safety relay
Test: to perform a precise and self-certified test, use the TS1007 (see page 23) instrument, which also serves to carry out the annual check.

PDF Download pdf file

VIDEO VIDEO TUTORIAL: CONNECTIONS

SGF100 connection  »

VIDEO BEINAT2Probes - Control - Test »

SGF100

You might also like