ATEX SG895 Flammable Gas Probe
Cod. SG895 - Flammable Gas Probe
The new ATEX SG895 assembled probe is born from the elegance and prestige that has always distinguished BEINAT S.r.l. and from the home fitness concept. The device has the capacity of controlling, through its Catalytic technology sensors, the presence of: Explosive Gases, and TOXIC GAS.
The probe is managed by a microprocessor which not only supplies an alarm signal to the Control Unit connected to it, but also executes a self-diagnosis and therefore an AUTOMATIC CALIBRATION in order to obtain the maximum detection accuracy at all times.
The self-calibration means the probe adapts in harsh and variable temperature environments, avoiding false alarms due to anomalous events.
The probe has a 4–20mA linear output, and can therefore be connected to one of the industrial control units manufactured by BEINAT S.r.l.
II 2 GD Ex d tD IIC T6 X -10 <T amb < +60°C
Power supply: 12÷24 VDC ± 10%
Power demand: 100 mA Max @ 13.8V
Indication: Green LED Normal operation, Red LED State of Alarm, LED Yellow Fault
Sensor: Catalytic/Electrochemical cell
Sensitive element working range for explosive gas: 100% of L.E.L.
Sensitive element working range for toxic gas: 1000 ppm
Operative Range selectable: 0÷20% or 0÷100% del LEL
Detected gases: See table below
Detector accuracy: 1% FS
Auto zero procedure: Included in the software
Analogic output signa: 4÷20 mA standard tolerance
Data transmission: Not present
Service Port: Present
Functioning temperature refered explsive gas: -10+70°C
Functioning temperature refered toxic gas: -20+50°C
Functioning humidity: 0-90% non condensed
Max. distance between probe and unit: 100 m
Case: Die-cast aluminium
Size: 100 mm
Degree of Protection: 66/67
Electromagnetic Reference Norms: EN 50270
Certificate Number: EUM1 10 ATEX 0169
Reference: EN 60079-0 EN 60079-1 EN 61241-0 EN 61241-1
Weight: 670 grams about
Compatible control units: whole range