SGM595 EXPLOSIVE Gas Probe conventional for Industrial use
EXPLOSIVE Gas Probe conventional for Industrial use - SGM595
The new SGM595 is born from the elegance and prestige that has always distinguished BEINAT S.r.l. and from the industrial fitness concept. The probe is a Catalytic gas detection unit with IP55 protection that, together with one of BEINAT’s industrial type Control Uni ts, detects the presence of EXPLOSIVE GASES such as: Methane, LPG, Hydrogen.
The probe is managed by a microprocessor which not only supplies an alarm signal to the control unit connected to it, but also allows execution of a self-diagnosis and therefore an AUTOMATIC CALIBRATION, in order to always have the maximum detection accuracy. The probe has a 0 ÷ 20 % L.E.L. linear output, conforming to the 4 ÷ 20mA standard.
The more important news of this probe is the capability to change the sensing element at the end of the life-cycle directly from a technician.
Power Supply: 12÷24 VDC dc ± 10%
Power Demand: 1W max @13,8V
Indication: Green LED Normal operation,
Red LED State of Alarm, LED Yellow Fault
Operative Range: 0÷20% LEL or 0÷100% del LEL
Input Signal: 4 ÷ 20 mA
Data transmission: Not present
Service Port: Present
Functioning Temperature: -10°C to +50°C
Functioning humidity : Lower than 90% RH
Installation Wall mounted
Degree of Protection: IP55
Compatible control units: whole range
Case and Size: ABS 78x114x58
Weight: 260 grams about