BX316xp Gas Detector Control Unit for Car Parks and Industrial Plants
BX316xp - Gas Detector Control Unit for Car Parks and Industrial Plants
The experience and the knowledge acquired over the years within industrial sector and market together with the prestige that has always made BEINAT S.r.l. stand out from its competitors comes to the new Gas Control Unit “BX316xp” aimed at checking, by means of probes coupled to it, the presence of gas: toxic and/or explosive.
Cutting-edge technologies enable the Gas detection control unit to be installed in industrial environments and underground parking spaces.
The control unit BX316xp has been designed and built to meet the current requirements of the Market and in compliance with European Standard for checking gas presence in a versatile and
innovative manner by connecting conventional probes.
Up to16 remote probes from 4 to 20 mA can be connected in conventional mode for a single zone or divided into two zoness: 8 probes for every zone.
Gas concentration measured by every probe sequentially is shown directly on display, with a description of its origin.
When one of the coupled probes exceeds the pre-alarm setpoint, the control unit generates a proportional sound signal, depending on the concentration of gas measured, and shows on the display the number of the probe, the amount of gas measured and its origin; the alarm triggered is saved in a memory (Datalogger).
Should it be necessary, the data stored can be printed (up to maximum 50 events).
The control unit features two levels of hazard:
1st LEVEL, pre-alarm. This data is variable. The technician can modify pre-alarm intervention for every probe according to the type of plant to be controlled. The level can be selected from 3% to 16% of L.E.L. or from 45 to 240 ppm
2nd LEVEL, general alarm. it is set to 20 % of L.E.L. or 300ppm
The control unit is equipped with two general alarm relays with/ without Positive Safety Switch to enable further independent control of two solenoid valves. Finally, the Control Unit allows the user to control the actual operation of the probes coupled.
Main Power Supply unboxed version: 12/15 VDC
Main Power Supply boxed version: 110/240 VAC 50/60 Hz.
Secondary power supply via battery: 12,7 V. dc
Battery Charger Max 2,2 Ah: Controlled
Power Demand: 30 W in Alarm
Pre allarm Relay: 10A 250V resistive
Main alarm Relay: 10A 250V resistive
Siren relay: 10A 250V resistive
Fault relay: 10A 250V resistive
Conventional probes: Max 16
Catalytic, Pellistor, Electrochemical, Semiconductor
1st Pre-Alarm Adjustable for every probe: Ffrom 3% to 16% of LEL
2nd Main alarm for every active area: 20 % del LIE - 300ppm
Input signal: 4 ÷ 20 mA over 150 Ohm
Ac curacy: 1 % FS
Opearting Range: Selectable 20 or 100 of LEL
Silent siren external and Buzzer integrated
Manual external alarm integrated
Functioning temperature -10°C ÷ + 60°C
Installation BX316xp: Panel mounted
Degree of protection IP20
Size: 158x90x58 9 modules
Size box: 197x122x67
Weight: 390 grammi about