CXM200/Q Explosive Gas Detector for Industrial use
Cod. CXM200/Q - Explosive Gas Detector for Industrial use
The CXM200/Q detector is a gas detection unit with IP55 protection degree.
It allows to detect the presence of: Explosive gas: Methane, LPG, and according to requirements.
The detector has two danger levels:
1st LEVEL, 1st Pre-Alarm. This is set at 13 % of L.E.L.
2nd LEVEL, Main Alarm. This is set at 20% of L.E.L.
The concentration of leaks is shown as a percentage of the LEL through Display.
Thanks to innovative technical plus what control’s software, the detector is proper to civil employments and industrial applications, that united to other technical, it is able to select with some micro interrupters the followings functions:
To choose inserting or not the Positive Safety
To choose the relay functioning mode (to impulse or to continuous)
To select inserting or not the memory of alarm occurred.
It allows a self-diagnosis and therefore an AUTOMATIC CALIBRATION so as to constantly maintain the maximum detection accuracy.
The self-calibration means the detector can adapt in harsh and variable temperature environments, avoiding false alarms.
Power Supply: 230/240 V.ca 50/60 Hz. +/- 10%
Power Consumption: 2,4W
Pre alarm and Main Relay: 10A 250V resistive
Sensitivity Prealarm: l 13% del L.I.E.
Sensitivity of main alarm: al 20% del L.I.E.
Device Accuracy: 1% FS
Sensor’s faults: Included
Positive Safety: Selectable
Control autozero.: Included
Warm-up time: 90 seconds
Audible and visual signal alarm by: LED and buzzer
Test buttons: Built in
Reset buttons: Built in
Functioning temperature: -10°C to +50°C
Functioning humidity: Lower than 90% RH
Degree of protection: IP65
Weight: 300 grams about