BX150 Modular Toxic and Explosive Gas Detector Control Unit
Cod. BX150 - Modular Toxic and Explosive Gas Detector Control Unit
Through the connection of 1 remote probe, the BX150 control unit has been designed and built according to European regulations to detect the presence of toxic and/or explosive gas flexibly.
A microprocessor is used to create a complete surveillance and control system with maximum flexibility. Thanks to this and its other features, the BX150 is suitable for civil and
The BX150 control unit has two danger levels:
1st LEVEL, 1st Pre-Alarm. This was set at 13 % of L.E.L. for ll probes.
2nd LEVEL, Main Alarm. This was set at 20% of L.E.L.
Other technical features make this control unit extremely versatile and reliable; for example, by using a series of micro-switches it is possible to:
Select or disable the probe when not installed or faulty;
Select the type of gas to be detected (toxic or explosive);
Choose the relay functioning mode (pulsed or continuous);
Choose selection of the intrinsic safety.
Power Supply: 230/240 VAC 50/60 Hz.
Battery power supply: 12 VDC ± 10%
Power Demand: 5W during alarms
The Pre alarm Relay: 10A 250V resistive
Main Alarm Relays: 10A 250V resistive
Max number of probe: 1
Catalytic, Pellistor, Electrochemical, Semiconductor
Explosion alarm threshold: At 20 % of L.E.L.
Toxic alarm threshold: From 30 ppm to 300ppm
Input signal: 4 ÷ 20 mA
Accuracy: 1 % FS
Positive Safety: Selectable
Fault output relay ON - OFF
Functioning temperature: -10°C ÷ + 60°C
Functioning humidity : Lower than 90% RH
Degree of protection: IP20
Installation: Panel mounted
Size: 112 x 96 x 44
Packaging: 170 x 170 x 120
Weight: 455 grams about