Calibrated spray cans for testing gas detectors

Calibrated spray cans for testing gas detectors

In order to protect the gas detection capsules, BEINAT provided customers with precalibrated spray cans, manufactured and loaded by the company SIAD.
These cans are also used to calibrate new plants, and to check detector efficiency. Please remember that when you initially acquire them you also need to buy the distributing valve.
The tipical canister are aluminium cased and the dimensions are 28cm high, 7.5cm diameter for 1liter of capacity.
The weight of the empty cans is 140g and the pressure of the full charged can is usually 12 bar but can change depending of the gas type.
To let the gas flow out from the can is needed a distributing valve.
This valve is interchangeable for all the canisters of the same dimensions.

BM101 Methane 12 lt
BM102 LPG12 lt
BM103 CO 98ppm 12 lt
BM104 CO 300ppm 12 lt
BM105 Hydrogen 12 lt
BM106 Acetylene12 lt
BM107 Acetone 12 lt
BM108 Cloro
BM109 Hydrogen Sulphide H2S
BM116 Freon R410a 12 lt
BM117 Freon R134a 12 lt
BM118 Freon R404 12 lt
BM119 Freon R407 12 lt
BM120 Ammonia Explosive
BM121 Oxygen
BM122 Toluene
BM123 Ammonia Toxic
BM125 Anidride Carbonica
VL101 Distributing Valve
VL111 Valve Gas Corrosive

Download pdf file